Changing the Wheels of Your Car

The minimum needed to replace the wheels in case of an emergency, includes a lift jack, wheel wrench, fitting the size of nuts (bolts) on the wheels. To have a wheel lock (boot) is also very desirable, but in a pinch you can use a lying stone on the roadside.

The lift jack and wheel wrench should be strong enough, if you are not confident in their strength, it is early to take care of their replacement. For example, it is better to replace a powder silumin key with a steel one with a long handle.

It is also useful a bank of technical aerosol WD-40. This tool is able to penetrate into rusted joints, making them more pliable. It is sometimes difficult to turn retaining nuts, when they were not removed for a long time, and WD can facilitate this task.

A repair kit wheel can also be useful in a long journey. The kit includes a rubber patch, special awl and glue. To find it is not so difficult, after walking through the market or specialized shops. Pay Less Car offers you to take advantage of the opportunity of a cheap rent a car Dubai.

Wheel replacement

Of course, replacement of a wheel may seem like a fairly simple operation. But numerous damages of cars caused by owners, trying to do this operation without some skill, say the opposite. And drivers sometimes get injured, as a rule, beginners.

• First find some safe area. If you noticed a flat tire while on the roadway, still try to park closer to the edge of the road and then replace the wheel. In any case, be careful.
• So, what you need to do in order to successfully complete the operation to replace the wheel. You should prepare your car: put it in gear and the handbrake. Under the wheels put “boots” to the car to it will not go away.
• When you replace the wheel, do not leave the nuts anywhere, not to lose them. Put them where they will be hard to get lost, for example, in the hubcap for the wheel.
• Take the spare tire (I hope you have one) and put it next to the car. Now slightly unscrew the nuts of the wheel, which you want to change, in order to make it easier to unscrew them on weight. But do not unscrew them too much, the nuts should still hold the wheel.
• Then take the jack and set it under a small angle on the stand. You need the stand to the jack stayed more reliable on the surface and not go in soft ground. Now lift the car and see, whether the resulting construction is stabled, nothing moves and so on.
• Now, when your car is raised – unscrew the damaged wheel fully ( unscrew the top nuts in last turn) and put it on the ground next to the car. But here The World of Advice would like to warn you: do not allow you hands to be between a rock and a hard place (for example, between the wheel and the road), and then who knows what.
• Then take the spare tire, which humbly waiting in the wings to the side, and put it on the vacant seat.
• Twist the nuts firmly, meanwhile, first you need to wind the top nut, and then other. You should tighten the nuts or bolts only in a specific order, “the cross”! This is necessary in order to center the wheel, so do not neglect this recommendation.
• Clamp it, do not be lazy. Then carefully lower the car and tighten to maximum mounts. Move the wheel to the trunk and take wedges under the wheels.
• Check the pressure of the wheel and if it is necessary pump up. Then tighten the nipple and check for air leaks.

That is basically all, now you can safely go on about your business. A pleasant journey and less breakdowns on the road!